So, you have come across the best RTA cabinet for your kitchen. But to make sure that they look the best, you need to install them properly. If you mess up the installation process, all its benefits can go out of the window.

To help you, we are going to tell you the mistakes you should avoid while installing RTA kitchen cabinets. Let’s check them out.

1. Choosing to Do It All By Yourself

If you are DIY-er, it might be tempting to do a little measuring and start assembling the RTA cabinets once they are delivered. However, without a design layout, you might end up with impressive-looking cabinets that are spread across a poor design.

But the good thing is you can easily avoid this by buying the RTA cabinets from a reputable dealer. When you are searching, check out the links for the design ideas. Choose one of these layouts or take advantage of the professional design consultation that is available for free.

It only means you are a smart person ready to do it yourselfif required.

2. Placing Them at Inadequate Heights

You should measure the cabinets before investing in them. The cabinets are not going to look impressive if there are large gaps where they are not supposed to be. Even people who measure properly might sometimes make mistakes in placing the cabinets at the wrong heights.

You might be tempted to place the upper wholesale kitchen cabinet right up against the ceiling. At times, homeowners think that there are no lower cabinets a little taller than regular. However, either of these situations can prove to be disastrous.

So, you should consider the whole look and not assume something.

3. Not Measuring New Appliances

Many homeowners have faced this situation. As they are almost done with the RTA kitchen cabinets, they realize that something doesn’t fit. How does that happen when they have measured everything? Well, they got brand new appliances.

Modern appliances are available in different standard sizes. Sadly, the standard size of appliances that are available today isn’t the same standard size as it was 10 years back. It is important to consider that when you are measuring and buying your cabinets based on the appliances that you have or will have in your home.

One of the primary purposes of purchasing an unfinished RTA wholesale cabinet is to ensure that you don’t have to pay the contractors for installations. However, it doesn’t mean that you will be able to do this job without proper knowledge. Avoid the mistakes given above as it will ensure that your RTA cabinets look incredible in your home.

4. Not Paying Attention to Power Outlet Placements

Another mistake that homeowners make while installing RTA kitchen cabinets is not paying attention to the placement of the power outlets. You have to decide where you are going to place the power outlets in your kitchen. So, before you start to install them, you will have to decide on their placements.

Firstly, you have to make sure that the kitchen cabinets are tall enough for including a power outlet. Then, you need to ensure that the cabinets are leaving enough space for you to access the outlets. In case you don’t do this, you will only end up with cabinets that don’t function well.

5. Not Considering the Lighting

When you are designing and installing RTA cabinets, you should avoid focusing on lighting. If you are not careful, you might end up with kitchen cabinets that don’t have proper lighting. You can place lights above the countertop. Before you start to install the cabinets, ensure where you are going to place the light. Leave enough room for the lights so that they function well.